SeniWav Driveway Sensor – 800m Wireless Motion Alert System with PIR Detection, 35 Chimes & IP65 Weatherproof Protection

Protect Your Property with the SeniWav Driveway Sensor

The SeniWav Driveway Sensor gives you an early warning when vehicles, visitors or other significant movement enters a monitored area of your property.

Using passive infrared motion detection, long-range wireless transmission and an indoor plug-in receiver, the SeniWav Driveway Sensor can alert you when movement is detected around driveways, gates, garages, paths, gardens and other outdoor areas.

With a stated wireless range of up to 800 metres in open conditions, a detection distance of approximately 10–15 metres, two sensitivity settings, 35 selectable chimes, 5 volume levels, IP65 weather resistance and support for up to four sensor zones, it is built for larger properties where simply hearing someone arrive isn't always enough.

Why Choose the SeniWav Driveway Sensor?

Long-Range Detection Without Wiring, Subscriptions or Complicated Installation

The SeniWav Driveway Sensor is designed to give you useful property alerts without requiring cameras, hard-wired cabling or ongoing subscription fees.

Key Features

• Up to 800m wireless transmission in open conditions

• PIR heat-motion detection

• Approx. 10–15m detection range

• Two adjustable sensitivity settings

• 35 selectable chimes

• Five volume levels

• Mute mode with visual LED alert

• IP65 weather-resistant outdoor sensor

• Operating temperature from approximately -20°C to 60°C

• Supports up to four sensor transmitters

• Supports multiple compatible receivers

• Different chimes can be assigned to different sensor zones

• Adjustable mounting bracket

• Plug-in indoor receiver

• No fixed wiring required

800m SeniWav Driveway Sensor

Receive Alerts Across Larger Homes and Properties

One of the main advantages of the SeniWav Driveway Sensor is its extended wireless transmission distance.

The system uses long-range wireless communication designed to transmit an alert from the outdoor sensor to the indoor receiver across distances of up to approximately 800 metres in unobstructed open conditions.

That can make the SeniWav Driveway Sensor suitable for:

• Long driveways

• Detached garages

• Farm entrances

• Front gates

• Large gardens

• Outbuildings

• Workshops

• Rural properties

Actual range will naturally vary depending on walls, buildings, trees, terrain and other sources of signal obstruction or interference.

PIR SeniWav Driveway Sensor

Detect Heat Movement from People, Vehicles and Larger Animals

The SeniWav Driveway Sensor uses passive infrared, or PIR, detection.

Rather than reacting simply to any physical movement, PIR technology responds to changes in infrared energy within the monitored area.

This allows the sensor to identify movement from heat-producing targets such as:

• People

• Vehicles

• Larger animals

When the sensor detects relevant movement, it sends a wireless signal to the indoor receiver, which then produces the selected audible and visual alert.

10–15m Detection Range

Monitor the Area Before Someone Reaches Your Door

The SeniWav Driveway Sensor has a stated motion-detection distance of approximately 10 to 15 metres, depending on the selected sensitivity setting and installation conditions.

Correct positioning is important.

Rather than pointing the sensor at an entire road or open area, position it so that expected movement crosses the monitored zone.

For vehicle monitoring, aim the detection area toward the path vehicles naturally follow into the property.

Adjustable SeniWav Driveway Sensor Sensitivity

Fine-Tune Detection for Different Locations

Not every installation needs maximum sensitivity.

The SeniWav Driveway Sensor provides two adjustable sensitivity levels, allowing the detection behaviour to be better matched to your environment.

Higher sensitivity can be useful for:

• Longer detection zones

• Wider driveways

• More distant movement

Lower sensitivity may be preferable where:

• Smaller animals frequently pass

• Vegetation is nearby

• The sensor is close to a busy path

• You only need alerts from nearer movement

Careful positioning and sensitivity adjustment can help reduce unnecessary notifications.

SeniWav Driveway Sensor with Reduced False Alerts

Focus Detection on the Area That Actually Matters

Outdoor motion detection can become frustrating if every moving branch, small animal or environmental change causes an alert.

The SeniWav Driveway Sensor combines PIR detection, adjustable sensitivity and a repositionable mounting bracket to help you define the area being monitored more precisely.

For better results:

• Avoid pointing directly at moving branches

• Avoid aiming toward intense direct sunlight where practical

• Keep the detection zone away from busy roads

• Position the sensor so people or vehicles move across its detection field

• Adjust sensitivity after testing the installation

No PIR sensor can guarantee zero false triggers, but careful setup can improve reliability significantly.

SeniWav Driveway Sensor with 35 Chimes

Choose an Alert Sound That Works for Your Home

The indoor receiver provides 35 selectable chime melodies, allowing you to customise how the SeniWav Driveway Sensor alerts you.

Choose a distinctive sound that is easy to recognise without confusing it with:

• Your front doorbell

• Telephone notifications

• Other household alarms

When multiple sensors are connected, different melodies can also help identify which monitored zone has been triggered.

Five Volume Levels on the SeniWav Driveway Sensor

Set Alerts from Quiet to Clearly Audible

The receiver provides five adjustable volume levels so you can choose an appropriate alert for the room.

Use a lower volume in:

• Bedrooms

• Home offices

• Quiet evenings

Use a higher volume in:

• Workshops

• Busy kitchens

• Larger houses

• Noisy environments

This gives the SeniWav Driveway Sensor more flexibility than systems with one fixed alert volume.

Mute Mode on the SeniWav Driveway Sensor

Keep Visual Alerts Without the Chime

There are times when you want to know that motion has been detected without hearing an alarm.

The SeniWav Driveway Sensor includes a mute setting that disables the audible chime while leaving the receiver's LED indication active.

This can be useful during:

• Night-time

• Meetings

• Baby sleep

• Quiet working hours

• Situations where audible alarms would be disruptive

IP65 SeniWav Driveway Sensor

Built for Year-Round Outdoor Installation

The outdoor sensor is rated IP65, providing protection against dust and water jets from normal outdoor weather exposure.

This makes the SeniWav Driveway Sensor suitable for permanent installation around:

• Driveways

• Gates

• Walls

• Fence posts

• Trees

• Garages

• Gardens

The sensor is also specified to operate across temperatures from approximately -20°C to 60°C, making it suitable for changing seasonal conditions.

SeniWav Driveway Sensor for Driveways

Know When a Vehicle Enters Before It Reaches the House

Long driveways can make it difficult to hear a vehicle arriving.

Install the SeniWav Driveway Sensor near an appropriate entry point and receive an alert inside when motion is detected.

This can be useful for:

• Expected visitors

• Deliveries

• Customers

• Tradespeople

• Family vehicles

• General property awareness

It provides an early notification rather than waiting until someone knocks at the door.

SeniWav Driveway Sensor for Gates and Entrances

Monitor Access Points Around Your Property

The SeniWav Driveway Sensor can also be installed near:

• Front gates

• Side entrances

• Garden gates

• Farm access points

• Workshop entrances

Position the sensor so movement crosses its field of detection rather than travelling directly toward it for better PIR response.

SeniWav Driveway Sensor for Garages and Outbuildings

Extend Awareness Beyond the Main House

Garages, workshops and outbuildings can sit far enough away that activity isn't immediately noticeable from inside the home.

The long-range wireless design of the SeniWav Driveway Sensor can help monitor these detached areas while keeping the receiver indoors.

This gives you another layer of awareness without needing to run new wiring across the property.

Expandable SeniWav Driveway Sensor System

Monitor Up to Four Different Zones

One sensor may be enough for a simple driveway, but larger properties often have several access points.

The SeniWav Driveway Sensor system can support up to four compatible motion sensors, allowing you to monitor multiple locations from one alert setup.

For example:

Zone 1

Main driveway

Zone 2

Side gate

Zone 3

Garage entrance

Zone 4

Rear path or garden entrance

Assign a different chime to each sensor so you can identify which zone has triggered without checking each area manually.

SeniWav Driveway Sensor with Multiple Receivers

Hear Alerts in More Than One Part of the Property

The system also supports additional compatible receivers.

That means the same sensor alert can be heard in different locations such as:

• Kitchen

• Bedroom

• Home office

• Workshop

• Upstairs hallway

This can be particularly useful in larger buildings where one receiver may not be audible everywhere.

Plug-and-Play SeniWav Driveway Sensor

Set Up Property Alerts Without Running Wires

The SeniWav Driveway Sensor is designed for straightforward installation.

The indoor receiver simply connects to a compatible wall socket, while the battery-powered outdoor sensor can be mounted using its supplied bracket.

There is no need to:

• Dig cable trenches

• Hardwire the house

• Install network cabling

• Pay for a monthly monitoring service

Once the units are paired and positioned correctly, the system is ready for testing.

Adjustable SeniWav Driveway Sensor Mount

Aim the Detection Zone Where You Need It

The supplied mounting hardware includes an adjustable bracket that lets you change the sensor angle after installation.

This is important because PIR performance depends heavily on placement.

Use the adjustable mount to control:

• Detection direction

• Horizontal alignment

• Vertical angle

• Distance from the monitored route

Small changes in angle can make a significant difference to which movements trigger the sensor.

Battery-Powered SeniWav Driveway Sensor

Install the Outdoor Sensor Without Mains Wiring

The wireless sensor is powered by 3 × AA 1.5V alkaline batteries.

Because the transmitter does not require a mains cable, it can be installed on suitable:

• Fence posts

• Trees

• Walls

• Gate structures

• Garage exteriors

Batteries are not included, so they should be purchased separately before installation.

SeniWav Driveway Sensor Installation Tips

Position the Sensor for More Reliable Detection

Correct installation is one of the biggest factors affecting PIR performance.

For best results:

1. Mount the sensor securely.

2. Point it across the expected path of movement.

3. Avoid excessive moving vegetation within the detection zone.

4. Avoid direct heat sources.

5. Begin with an appropriate sensitivity setting.

6. Walk or drive through the area several times to test detection.

7. Fine-tune the bracket angle if necessary.

8. Test the indoor receiver from its intended location.

Taking a few extra minutes during installation can produce a more useful alert system.

Where Can the SeniWav Driveway Sensor Be Used?

One Wireless Alert System for Multiple Property Areas

The SeniWav Driveway Sensor is suitable for monitoring locations such as:

• Driveways

• Front gates

• Side gates

• Garages

• Gardens

• Pathways

• Outbuildings

• Workshops

• Pools

• Farm entrances

• Business entrances

• Parking areas

It is intended as an awareness and alert device rather than a replacement for locks, cameras or a monitored security alarm.

SeniWav Driveway Sensor vs Basic Motion Alert

Technical Specifications – SeniWav Driveway Sensor

Frequently Asked Questions About the SeniWav Driveway Sensor

How far does the SeniWav Driveway Sensor transmit?

The SeniWav Driveway Sensor has a stated wireless range of up to approximately 800 metres in open conditions. Buildings, walls, terrain and other obstructions can reduce the real-world range.

How far can the SeniWav Driveway Sensor detect motion?

The PIR sensor has a stated detection range of approximately 10–15 metres, depending on positioning, sensitivity and environmental conditions.

Can the SeniWav Driveway Sensor detect vehicles?

Yes. Vehicle movement can trigger the PIR sensor because vehicles produce and move heat. Correct sensor positioning is important for reliable detection.

Can the SeniWav Driveway Sensor detect people?

Yes. People moving through the detection zone are one of the primary intended targets of the PIR sensor.

Is the SeniWav Driveway Sensor waterproof?

The outdoor transmitter is rated IP65, meaning it is designed to resist dust and normal rain/water exposure associated with outdoor use.

Can I change the sensitivity?

Yes. The SeniWav Driveway Sensor provides two selectable sensitivity settings.

How many alarm sounds are available?

The indoor receiver provides 35 selectable chimes.

Can I turn the SeniWav Driveway Sensor sound off?

Yes. Mute mode disables the audible chime while retaining the visual LED alert.

Can I add more sensors?

Yes. Up to four compatible sensor transmitters can be paired within the supported system.

Can each SeniWav Driveway Sensor have a different sound?

Compatible multi-sensor setups can use different chimes to help distinguish which monitored zone has triggered.

Can I use more than one receiver?

The system supports multiple compatible receivers, making it useful when alerts need to be heard in several parts of a larger property.

What batteries does the SeniWav Driveway Sensor need?

The outdoor sensor uses 3 × AA 1.5V alkaline batteries, which are not included.

Where should I install the SeniWav Driveway Sensor?

It can be mounted on suitable walls, fence posts, trees and other stable structures near driveways, gates, paths, garages and similar monitored areas.

Get Earlier Property Alerts with the SeniWav Driveway Sensor

Long Wireless Range, Adjustable PIR Detection and Expandable Zone Coverage

The SeniWav Driveway Sensor combines an up to 800m open wireless range, 10–15m PIR detection, two sensitivity levels, 35 chimes, five volume settings, IP65 outdoor protection and support for up to four monitored zones in one straightforward wireless alert system.

Use it to know when someone enters your driveway, approaches a gate, moves near an outbuilding or crosses another important area of your property.

With battery-powered outdoor installation and a plug-in indoor receiver, the SeniWav Driveway Sensor gives you greater awareness without wiring, monthly subscriptions or complicated installation.

SeniWav Driveway Sensor — know when someone arrives before they reach your door.